How to Install a Moen kitchen faucet

If you’re planning on installing a new kitchen faucet, and want to know how to install a moen kitchen faucet. So, you need to be sure that it will fit the space you have available in your kitchen sink. A few things you need to consider are the height of the faucet, the length of the faucet, and the size of the neck on the sink.

A kitchen faucet includes the fixture, the spout, and the sprayer. If you install your own faucet, you must know how to make sure the sink drains properly. Most homeowners use a combination of gravity and pressure to drain water out of sinks. You may also need to add anti-siphon valves or check all pipes for leaks.

Moen single-handle kitchen faucet installation instructions will vary slightly depending on the model. Installing a Moen kitchen faucet with a single handle and retractable sprayer is like that of other types. Unless your faucet includes preattached supply tubes, you must purchase flexible supply tubes separately.

With a wide range of kitchen faucet types to choose from, Moen has something to suit every taste. In this post, we’ll show you how to install a kitchen faucet from Moen. Moen Kitchen Faucets are the best in the market. They have a wide range of products that can meet your needs and requirements. Moen is one of the most trusted brands when it comes to kitchen faucets because they offer quality products at affordable prices. Their products are durable and long-lasting. The company has been around since 1866 and its reputation speaks volumes about them. It is no wonder why so many people trust them. This article will give you some tips on how to install a Moen kitchen faucet.

Needed Tools for Installation of Moen Kitchen Faucet

You’ll need the following tools to install a moen kitchen faucet:

  • A wrench, a pair of pliers, or an adjustable wrench.
  • A clean rag or paper towels.
  • The correct size faucet-to-sink aerator adapter.
  • A screwdriver.
  • A rubber mallet (or hammer)
  • Some pliers (optional, but nice to have)
  • Safety glasses
  • Flash Light

Preparation to install moen kitchen faucet

Before you begin, prepare yourself. Make sure you have everything you need before beginning any project. Always wear safety glasses and gloves while working on your home’s plumbing system. Use caution when using tools such as wrenches or pliers. Be careful when lifting heavy objects. Before starting the actual installation process, you should always read through the entire instruction manual carefully.

  1. Turn off the hot and cold water inlets on your kitchen faucet, which are normally found in the cupboard beneath the faucet. Gather the necessary tools for the procedure. We recommend wearing safety glasses and using a Phillips screwdriver with an adjustable wrench.
  2. Measure the distance between the countertop and where you want the faucet to be mounted. Make sure that this measurement is accurate.
  3. Decide whether you want a single handle or two handles. Single handle faucets usually come with a pull-down sprayer while double handle faucets come with a fixed sprayer.
  4. Check the dimensions of your sink. Do not forget to measure the width and depth of the sink.
  5. Find out if there are any obstructions in your sink. If there are any obstacles like plumbing pipes or electrical wires, then you should move these out of the way before you start installing the faucet.
  6. Before you begin installing the faucet, make sure that you remove the old faucet first. Then clean up the area thoroughly. Use a damp rag to wipe away dirt and grime.

How to Install Kitchen Moen Faucet

When you’re installing a moen kitchen faucet, the first thing to do is remove any old hardware that might still be on the sink. This can be a little tricky depending on your sink, so we’ve outlined some common scenarios to help you out:


4 Best Moen Kitchen Faucet Reviews 2022 | Top Rated Moen Kitchen Faucets

Thinking of buying the best Moen kitchen faucet? This video will inform you exactly which are the best budget Moen Kitchen Faucet on ...

Installing a Pullout Kitchen Faucet | Moen Guided Installations

Learn how to install your Moen pullout kitchen faucet yourself.

Scenario 1: You have a single-hole faucet with a sprayer attached.

If this is your scenario, you’ll need to take off the sprayer from the spout of the faucet first. If you want to keep it, that’s cool—just make sure you install it properly because bad plumbing can lead to all kinds of disasters.

Next, unscrew the escutcheon plate from beneath the sink and set it aside for now.

Once that’s done, loosen up all the nuts holding down the faucet with your adjustable wrench. Be careful not to over-tighten them or you could warp or snap them! If they get stuck, try spraying them with some WD-40. That stuff works wonders!

Now just unscrew and lift off the old faucet and give yourself a pat on the back! You’ve earned it!

Scenario 2: You have a double-hole faucet without a sprayer attached.

In this case, you’ll need to remove both holes before installing your new faucet.

First, remove the screws that hold down the two holes. Then, carefully pull up on the faucet handles until you hear a click. Once you’ve pulled them up, you should see an access panel underneath where you can disconnect the flexible supply tube.

You’ll then need to remove the old supply tube. It should come right out easily.

Finally, you’ll need to replace the escutcheon plate. Make sure to tighten everything down as tight as possible. Don’t forget to put the washer under the nut at the top of the escutcheon plate too.

Scenario 3: You have a multi-hole faucet (like our M-5) with a sprayer attached to one hole.

In this case, you’ll only need to remove the screw that holds down the spout. The other holes won’t matter since there’s no sprayer involved.

After removing the screw, gently pull up on the handles until you hear a clicking sound. At this point, you should be able to remove the escutcheon plate and access the flexible supply tube. Just like in Scenario 1, you’ll need to disconnect the old supply tube.

Then, you’ll need to reinstall the new supply tube. To do this, simply push it through the hole and twist it into place. Tighten the nut at the end of the supply tube by hand.

Scenario 4: You have a double-hole faucet with a built-in sprayer.

This is the most complicated scenario but also the easiest. All you need to do is remove the sprayer assembly and the escutcheon plate first.

To remove the sprayer assembly, start by loosening the three bolts that attach it to the sink. Next, unplug the wires that connect it to the water valve. Finally, unscrew the sprayer itself.

To remove the escutcheon, start by loosening all four mounting screws. Then, carefully pull it up and away from the sink.

At this point, you’re ready to install your new faucet! First, plug in the water valve and turn it on.

Next, slide the escutcheon plate onto the faucet body. Use the supplied hardware to secure it in place.

Finally, reattach the sprayer assembly to the faucet using the same steps you used to remove it.

That’s it! Now you have a brand new faucet installed in less than 30 minutes. And best of all, it looks great too!

Common work for all scenarios

  1. Ensure that the hoses are positioned in the washer’s curve. With your fingers, thread the mounting nut onto the faucet shank, and once the faucet is properly positioned, tighten the mounting nut with the installation tool that was given. To make tightening the tool simpler, insert a screwdriver into the end of the tool. Taking note of the rough edges on the faucet shank, thread the hose guide nut on the end to prevent the pull-down hose from rubbing against the edges of the faucet shank.
  2. Install the pullout hose and hose weight by inserting the tiny end of the pullout hose into the faucet spout, removing the protective cap, and then sliding on the doughnut-shaped weight. Use our unique Dura Lock Quick Connect system to connect the pullout hose to the faucet. Simply put the hose into the connector, and an audible click signals a secure connection.
  3. Water supply lines should be connected. An adjustable wrench should be used to secure the connection between the hot supply line and the hot water inlet, which has a white tag. Attach the cold side in the same way. You want the connection to be snug, but not too tight.
  4. To remove any debris from the system, turn the hot and cold water inlets back on, insert the pullout hose into the sink, and turn on the faucet for about 15 seconds. This will flush any dirt or debris from the system.
  5. Remove the protective cover on the end of the spray wand and ensure that the rubber washer and screen are in place before attaching the spray wand to the pullout hose. Thread the spray wand onto the pullout hose and tighten it with an adjustable wrench only until the hose nut is flush with the wand.
  6. The next step is to clean up so that the spray wand can work correctly. Any cleaning supplies or other objects that could obstruct hose movement should be removed from the area around the hose. Congratulations, your job is complete. Installing a pull-out kitchen faucet with Moen is quick and uncomplicated.


Before using it, check that the handle is on your right and that the spout is facing you. If the thickness of your countertop or sink is less than a half-inch, you should install the support bracket and mounting washer to provide additional support and stability.
If it is bigger than a half-inch, only the mounting washer needs to be installed. To demonstrate a thin installation beneath your countertop or sink, first, move the support bracket over the hoses and faucet shank, and then slide the mounting washer over the faucet shank.

Some Common Problems with Kitchen Faucets

Kitchen faucets are very important fixtures in kitchens. They help us wash our dishes after meals and keep the kitchen tidy. However, we often neglect to take care of our kitchen faucets once they get damaged. That’s why it is always better to check for damages and fix them immediately. Here are some common problems that may occur in kitchen faucets:

  1. Leaking Water: If the faucet leaks, you need to replace the entire unit.
  2. Stuck spouts: If the spout gets stuck, you need to unscrew it carefully and reattach it properly.
  3. Noisy operation: If the faucets make loud noises, you need to replace their parts.
  4. Hot water leaking: If hot water starts leaking, you need to shut off the valve and let it cool. After that, you need to open the valve again.
  5. Cracked valves: If the valves crack, you need to replace them.
  6. Dirty filters: You need to change the filter regularly.
  7. Sink clogs: If the sink becomes clogged, you need to unclog it by pushing the drain hose gently.
  8. Damaged taps: If the tap is damaged, you need to replace it.

If you notice any problems with your kitchen faucets, you need to contact a professional plumber who specializes in fixing kitchen faucets. A good plumber will charge you only $30-$50 per hour of work. This means that you can save money on repairs because you won’t have to pay for several hours of labor.


Upgrading the faucet to Moen is a great decision and it will pay off right away. The installation process is quite easy if you are a bit experienced in this area. Just follow our guide and enjoy the new faucet already!

Hopefully, these installation instructions have provided you with all of the information you need to tackle this project. And if you follow these steps, then your faucet should be installed in no time at all.